AMX Modero NXT-1200V - Manual (Page 136)

Programming
124 NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel
"^" Button Commands (Cont.)
^BMF (Cont.) ’%GI’ = Set the bargraph invert/noninvert or joystick coordinate
(0,1,2,3). ^GIV section on page 130 more information.
’%GU’ = Set the bargraph ramp up time in intervals of 1/10 second.
’%GD’ = Set the bargraph ramp down time in 1/10 second.
’%GG = Set the bargraph drag increment. Refer to the ^GDI
command on page 129 for more information.
’%VI’ = Set the Video either On (value=1) or Off (value=0).
’%OT’ = Set the Feedback (Output) Type to one of the following:
None, Channel,Invert, On (AlwaysOn), Momentary, or Blink.
’%SM’ = Submit a text for text area button.
’%SF<1 or 0>’ = Set the focus for text area button.
’%OP<0-255>’ = Set the button opacity to either Invisible (value=0) or Opaque
(value=255).
’%OP#<00-FF>’ = Set the button opacity to either Invisible (value=00) or Opaque
(value=FF).
’%UN’ = Set the Unicode text. See the^UNI section on page 135 for the
text format.
’%LN<0-240>’ = Set the lines of video being removed. See the^BLN section on page 121
for more information.
’%EF’ = Set the text effect.
’%EC’ = Set the text effect color.
’%ML’ = Set the maximum length of a text area.
’%MK’ = Set the input mask of a text area.
’%VL<0-1>’ = Log-On/Log-Off the computer control connection
’%VN’ = Set network connection name.
’%VP’ = Set the network connection password.
Example:
SEND_COMMAND Panel,"'^BMF-500,1,%B10%CFRed%CB Blue
%CTBlack%Ptest.png'"
Sets the button OFF state as well as the Border, Fill Color, Border Color, Text Color, and
Bitmap.
^BMI
Set the button
mask image.
Mask image is used to crop a borderless button to a non-square shape. This is typically
used with a bitmap.
Syntax:
"'^BMI-,,'"Variable: variable text address range = 1 - 4000.button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).mask image = Graphic file used.Example:SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'"Sets the button with variable text 530 ON/OFF state mask image to 'newmac.png'.^BMLSet the maximum
length of the text
area button.If this value is set to zero (0) there is no max length. The maximum length available is
2000. This is only for a Text area input button and not for a Text area input masking button.Syntax: "'^BML-,'"Variable: variable text address range = 1 - 4000.max length = 2000 (0=no max length).Example:SEND_COMMAND Panel,"'^BML-500,20'"Sets the maximum length of the text area input button to 20 characters.
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
mask image = Graphic file used.
Example:
SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'"
Sets the button with variable text 530 ON/OFF state mask image to 'newmac.png'.
^BML
Set the maximum
length of the text
area button.
If this value is set to zero (0) there is no max length. The maximum length available is
2000. This is only for a Text area input button and not for a Text area input masking button.
Syntax:
"'^BML-,'"
Variable:
variable text address range = 1 - 4000.
max length = 2000 (0=no max length).
Example:
SEND_COMMAND Panel,"'^BML-500,20'"
Sets the maximum length of the text area input button to 20 characters.