Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 116)

IM 11M13A01-04E 9-8
9.2.1.7Default Values
When the analyzer is delivered, or if data are initialized, the calibration settings are by
default, as shown in Table 9.2.
Table 9.2 Default Settings for Calibration
Item Default Setting
Calibration mode Manual
Calibration procedure Span - zero
Zero-gas (oxygen) concentration 1.00%
Span-gas (oxygen) concentration 21.00%
Output hold (stabilization) time 10 minutes, 00 seconds
Calibration time 10 minutes, 00 seconds
Calibration interval 30 days, 00 hours
Start date and time 00 (YY) 01 (MM) 01(DD) 00:00
T9.2.EPS