Yokogawa EJX930A - Manual (Page 68)

<9. Parameter Lists>
9-4
IM 01C25T02-01E
Relative
Index Index
Parameter Name Factory Default
Write
Mode
Explanation
81 1081 FD_MAINT_ALM AUTO Indicates alarm information for alarms categorized under
”Maintenance”.
82 1082 FD_CHECK_ALM AUTO Indicates alarm information for alarms categorized under
”Check Function”.
83 1083 FD_FAIL_PRI 0 AUTO Indicates the FD_FAIL_ALM priority for an alarm.
84 1084 FD_OFFSPEC_PRI 0 AUTO Indicates the FD_OFFSPEC_ALM priority for an alarm.
85 1085 FD_MAINT_PRI 0 AUTO Indicates theFD_MAINT_ALM priority for an alarm.
86 1086 FD_CHECK_PRI 0 AUTO Indicates the FD_CHECK_ALM priority for an alarm.
87 1087 FD_SIMULATE AUTO A parameter for simulating an alarm.
88 1088 FD_RECOMMEN_
ACT
0 — Indicates procedures for handling essential alarms.
89 1089 FD_EXTENDED_
ACTIVE_1
0 — A parameter serving as a starting point for alarms handled by
FF-912.
90 1090 FD_EXTENDED_
ACTIVE_2
0 — A parameter serving as a starting point for alarms handled by
FF-912.
91 1091 FD_EXTENDED_
ACTIVE_3
0 — A parameter serving as a starting point for alarms handled by
FF-912.
92 1092 FD_EXTENDED_
ACTIVE_4
0 — A parameter serving as a starting point for alarms handled by
FF-912.
93 1093 FD_EXTENDED_
ACTIVE_5
0 — A parameter serving as a starting point for alarms handled by
FF-912.
94 1094 FD_EXTENDED_
ACTIVE_6
0 — A parameter serving as a starting point for alarms handled by
FF-912.
95 1095 FD_EXTENDED_
ACTIVE_7
0 — A parameter serving as a starting point for alarms handled by
FF-912.
96 1096 FD_EXTENDED_
ACTIVE_8
0 — A parameter serving as a starting point for alarms handled by
FF-912.
97 1097 FD_EXTENDED_
MAP_1
0x0708FFFF AUTO A parameter set by the user as a mask from DEVICE_
STATUS_1 to FD_EXTENDED_ACTIVE_1.
98 1098 FD_EXTENDED_
MAP_2
0xFEFF8000 AUTO A parameter set by the user as a mask from DEVICE_
STATUS_2 to FD_EXTENDED_ACTIVE_2.
99 1099 FD_EXTENDED_
MAP_3
0xF0008000 AUTO A parameter set by the user as a mask from DEVICE_
STATUS_3 to FD_EXTENDED_ACTIVE_3.
100 1100 FD_EXTENDED_
MAP_4
0xFF000000 AUTO A parameter set by the user as a mask from DEVICE_
STATUS_4 to FD_EXTENDED_ACTIVE_4.
101 1101 FD_EXTENDED_
MAP_5
0xF0000000 AUTO A parameter set by the user as a mask from DEVICE_
STATUS_5 to FD_EXTENDED_ACTIVE_5.
102 1102 FD_EXTENDED_
MAP_6
0x54890007 AUTO A parameter set by the user as a mask from DEVICE_
STATUS_6 to FD_EXTENDED_ACTIVE_6.
103 1103 FD_EXTENDED_
MAP_7
0x00007FFC AUTO A parameter set by the user as a mask from DEVICE_
STATUS_7 to FD_EXTENDED_ACTIVE_7.
104 1104 FD_EXTENDED_
MAP_8
0xFC000000 AUTO A parameter set by the user as a mask from DEVICE_
STATUS_8 to FD_EXTENDED_ACTIVE_8.
105 1105 PRIVATE_1 — Not used for the transmitter.
106 1106 PRIVATE_2 — Not used for the transmitter.
107 1107 PRIVATE_3 — Not used for the transmitter.
108 1108 PRIVATE_4 — Not used for the transmitter.
109 1109 PRIVATE_5 — Not used for the transmitter.
110 1110 PRIVATE_6 — Not used for the transmitter.
111 1111 PRIVATE_7 — Not used for the transmitter.
112 1112 PRIVATE_8 — Not used for the transmitter.
113 1113 PRIVATE_9 — Not used for the transmitter.
114 1114 PRIVATE_10 — Not used for the transmitter.
115 1115 PRIVATE_11 — Not used for the transmitter.
116 1116 DEVICE_
CONDITION_
ACTIVE_1
0x00000000 — FD_EXTENDED_ACTIVE_1 & FD_EXTENDED_MAP_1
117 1117 DEVICE_
CONDITION_
ACTIVE_2
0x00000000 — FD_EXTENDED_ACTIVE_2 & FD_EXTENDED_MAP_2
118 1118 DEVICE_
CONDITION_
ACTIVE_3
0x00000000 — FD_EXTENDED_ACTIVE_3 & FD_EXTENDED_MAP_3