A7.8, A7-4 – Yokogawa EJX930A User Manual
Page 141
A7-4
IM 01C25T02-01E
A7.8 Resource Block’s Parameters Relating to Software Download
Table A7.3 Additional Parameters of Resource Block
Relative
Index
Index
Parameter Name
Default
(Factory Set)
Write
Mode
Description
53
1053
SOFTDWN_PROTECT
0x01
Defines whether to accept software
downloads.
0x01: Unprotected
0x02: Protected
54
1054
SOFTDWN_FORMAT
0x01
Selects the software download method.
0x01: Standard
55
1055
SOFTDWN_COUNT
0
—
Indicates the number of times the internal
FlashROM was erased.
56
1056
SOFTDWN_ACT_AREA 0
—
Indicates the ROM number of the
currently working FlashROM.
0: FlashROM #0 working
1: FlashROM #1 working
57
1057
SOFTDWN_MOD_REV 1, 0, 0, 0, 0, 0, 0, 0, 0 —
Indicates the software module revision.
58
1058
SOFTDWN_ERROR
0
—
Indicates an error during a software
download. See Table 4.
Table A7.4 Download Error Codes
Error
Code
Detail
0
No error
32768 Unsupported header version
32769 Abnormal header size
32770 Abnormal manufacturer ID
32771 Abnormal device family
32772 Abnormal device revision
32773 Abnormal vendor specification version
32774 Abnormal number of modules
32775 Abnormal number of bytes in module 1
32776 Abnormal number of bytes in module 2
32777 Device error in module 1
32778 Checksum error in module 1
32779 Checksum error in file
32780 Unused
32781 Write-prohibited area in FlashROM
32782 Verification error during FlashROM writing
32783 Polling error during FlashROM erasing
32784 Polling time-out during FlashROM erasing
32785 Polling error during FlashROM writing
32786 Polling time-out during FlashROM writing
32787 FlashROM driver undefined number error
32788 File endcode error
32789 File type error (UPDATE, ORIGINAL)
32790 FlashROM driver undefined number error
Error
Code
Detail
32791 On-start state error (other than DWNLD_NOT_
READY)
32792 Start segment error in module 1
32793 Binary file error
32794 Binary file error
32795 Device error in module 2
32796 Detection of EEPROM state other than backup
after activation
32797 Checksum error in module 2
32798 Not in DWNLD_READY state when receiving
GenericDomainInitiate
32799 Not in DWNLD_OK state when receiving
GenericDomainTerminate
32800 Not in DOWNLOADING state when receiving
GenericDomainSegment
32801 Firmware error
36863 Unused