Teledyne LeCroy WaveRunner Automation Command - Manual (Page 98)

Automation Command and Query Reference Manual - Control Reference
SegmentMode Enum
Sets/Queries the display mode for segmented input channels. All visible channels are set to the same
display mode by a single command.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the display mode for segments in C2 to perspective.
app.Acquisition.C2.SegmentMode = "Perspective"
Example
Values
Adjacent All segments displayed end-to-end, left to right
Mosaic Segments displayed in a mosaic, top-left to bottom right
Overlay Segments are overlaid, similar to persistence
Perspective Segments are displayed in a perspecfive view
Waterfall Successive segments are displayed with increasing vertical offset
TraceIntensity Double
From 1 to 100 step 1 Range
Control the intensity of traces.
Description
TraceStyle Enum
Sets/Queries the style in which traces are drawn.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Read the state of the persistence mode.
TraceStyle = app.Display.TraceStyle
Example
Values
Line Connect adjacent samples with straight lines
Points Show only the sample points
ELECTRICALTELECOM app.ElectricalTelecom
Root Automation node to control Electrical Telecom (ET-PMT) package. This package is performing Pulse Mask Test
on diferent SONET/SDH standards.
ClearSweeps Action
Polarity Enum
Run Action
Setup Action
Source Enum
1-90
918500 RevA