Teledyne LeCroy WaveRunner Automation Command - Manual (Page 314)

Automation Command and Query Reference Manual - Control Reference
VerScaleType Enum
Vertical Scale mode of the histogram, Linear, or 'Linear with Constant Maximum'.
Description
Values
LinConstMax
Linear
RESULT app.WaveScan.ScanHisto.Out.Result
ZOOM app.WaveScan.ScanHisto.Zoom
HorPos Double
From -0.5 to 0.5 step (8 digits) Range
Horizontal Position of the trace, normalized to a value between -0.5 and 0.5. A value of zero is the
default, and indicates no position change relative to the source trace.
Description
HorZoom Double
From 0.1 to 1e+006 step (8 digits) Range
Horizontal Zoom setting. Locked to a 1, 2, 5 sequence unless VariableHorZoom is set to True .
Description
ResetZoom Action
Resets the zoom settings to their default values.
Description
VariableHorZoom Bool
Enable/Disable the variable Horizontal Zoom control. If enabled, the HorZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
Description
HorPos Double
HorZoom Double
ResetZoom Action
VariableHorZoom Bool
VariableVerZoom Bool
VerPos Double
VerZoom Double
1-306
918500 RevA