Teledyne LeCroy WaveRunner Automation Command - Manual (Page 350)

Automation Command and Query Reference Manual - Processor Reference
app.Math.F1.Operator1 = "Integral"
app.Math.F1.Operator1Setup
Adder Double
From -1e-009 to 1e-009 step 1e-012 Range
Sets/Queries the additive A for the integral function Fx, where Fx = M . Input + A.
Description
AutoFindScale Bool
Set/Query the state of the 'AutoFindScale' cvar, which enables the automatic scaling of the Integral
when the acquisition setup changes.
Description
FindScale Action
Initiates an action to find suitable vertical offset and scale for the integral function trace Fx.
Description
Multiplier Double
From -1e+006 to 1e+006 step 1e-006 Range
Sets/Queries the multiplying constant M for the integral function Fx, where Fx = M . Input + A
Description
VerOffset Double
From -1e+006 to 1e+006 step 1e-015 Range
Sets/Queries the vertical offset for the integral function trace Fx.
Description
VerScale DoubleLockstep
From 1e-012 to 1e+007 step 0.01, locked to 1 2 5, fine grain allowed=false, on=false Range
Sets/Queries the vertical scale for the integral function trace Fx.
Description
INTERPOLATE
app.Math.Fx.OperatorYSetup (Operator = "Interpolate")
Interpolate, producing more points in the resulting waveform using linear, cubic, or weighted sin(x)/x algorithms.
DownFactor Action
Expand DoubleLockstep
HalfWidth Integer
InterpolateType Enum
KaiserBeta Double
NoiseGain Double
UpFactor Action
USE_1_2_5 Bool
2-19
918500 RevA