Scandecode, Result – Teledyne LeCroy WaveRunner Automation Command User Manual
Page 309

Automation Command and Query Reference Manual - Control Reference
Sets/Queries the WaveScan enabled state.
Description
FindRare1Sigma
Action
Preset the filter limit and delta to find rare events. Uses the history of measurements since the last
Clear Sweeps, or control change, to set the limit and delta to capture +/- 1 sigma events.
Description
FindRare3Sigma
Action
Preset the filter limit and delta to find rare events. Uses the history of measurements since the last
Clear Sweeps, or control change, to set the limit and delta to capture +/- 3 sigma events.
Description
FindRare5Sigma
Action
Preset the filter limit and delta to find rare events. Uses the history of measurements since the last
Clear Sweeps, or control change, to set the limit and delta to capture +/- 5 sigma events.
Description
FindUseMean
Action
Setup the filter to find measurements with values > the current statistical mean.
Description
ShowTimes
Bool
SCANDECODE
app.WaveScan.ScanDecode
ClearSweeps
Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
TableLocation
String
Any number of characters
Range
View
Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
ClearSweeps
Action
TableLocation
String
View
Bool
RESULT
app.WaveScan.ScanDecode.Out.Result
1-301
918500 RevA