Teledyne LeCroy WaveRunner Automation Command - Manual (Page 413)

Automation Command and Query Reference Manual - Processor Reference
Timeout Double
From 1 to 12000 step 0.001 Range
LEVELATX
app.Measure.Px.Operator (ParamEngine = "LevelAtX")
HorValue Double
From -1.79769e+308 to 1.79769e+308 step 0 Range
if the "TimeFromCvar" is set to true, this specifies the horizontal (x) coordinate at which the waveform
data "level" or value is to be evaluated
Description
PinToData Bool
If set to true, the vertical values are restricted to actual data points, else if false the values can be
interpolated (linearly) between points.
Description
TimeFromCvar Bool
If true, the horizontal coordinate (typically time) is specified by the "HorValue" cvar, otherwise the time
is specified by the input pin.
Description
HorValue Double
PinToData Bool
TimeFromCvar Bool
LOCALBASE
app.Measure.Px.Operator (ParamEngine = "LocalBase")
Hysteresis Double
From 0 to 10 step 0.1 Range
Hysteresis Double
LOCALBASELINESEPARATION
app.Measure.Px.Operator (ParamEngine = "LocalBaselineSeparation")
Hysteresis Double
Hysteresis Double
2-82
918500 RevA