IAI America ISWA - Manual (Page 88)

80
14. Change History
14. Change History
Revision Date Revision Description
2010.04
2010.07
First Edition
Second Edition Page
2011.04 Third Edition A page for CE Marking added
9 Precautions in Handling
duty more than 50% duty that exceeds 50%
Page 31 Section "6.2 Wiring with Dedicated Stand-Alone
Cable (CS Series)" deleted
Page 32 Statement changed to "Make sure to have a radius
more than the minimum bending radius when using
a cable track."
Page 38 " " added to "After 6 months of operation" in
"Grease Supply"
Page 40 Statement telling to wipe off the base
2012.03 Fifth Edition Page 1 to 7 Contents added and changed in Safety Guide
Page 9 Note "Make sure to attach the actuator properly by
following this instruction manual." added in Caution
in Handling
Page 41 Warning notes added such as in case the grease
got into your eye, immediately go to see the doctor
for an appropriate care.
oil when it is
appeared on the sides of the guide rail is added
Page 41 Statement telling to utilize the JOG operation for
the low lead actuator is added
2012.03 Fourth Edition Contents changed in Safety Guide
Caution notes added for when working with two or more persons
Pages 22, 24 Note changed to 1.8 times more of the nominal
diameter for the length of thread engagement
on aluminum