IAI America ISWA - Manual (Page 33)

25
5. Installation
Slider Tap Hole Diameter and Reamer Diameter (on sides)
Machine
Type
Tap
diameter
Tap depth D E F
Reamer
Hole
Reamer
Depth
Small Size M6 12mm 40mm - - 8mm
Medium Size M6 13mm 50mm 30mm 35mm 8mm
Large Size M6 13mm 40mm 50mm 50mm 8mm
Bolt to
be used
Tightening Torque
In the case that steel is used for
the bolt seating surface:
In the case that aluminum is used for
the bolt seating surface:
M6 12.3N•m(1.26kg•m) 5.4N•m(0.55kg•m)
For the bolts to be used, a high-tensile bolt complying with ISO- 10.9 or more is recommended.
If using the tapped holes, use screws with the thread length dimension being less than the effective
depth of the holes.
The length of thread engagement should be 1.8 times more than the nominal diameter.
Detail : A
140
155
125
110
115
A