IAI America ISWA - Manual (Page 18)

10
7.2 Handling of Multi-Axes Type
Exercise precaution to the following when transporting the multi-axes.
7.2.1 Handling the Packed Unit
avoid it swinging by external vibration.
Do not damage or drop. The package is not supplied with any special treatment that enables it to
resist an impact caused by a drop or crash.
The operator should not carry heavy shipping boxes by themselves. Consider an appropriate method
for transportation.
When suspending the package using ropes, pass the ropes from underneath the reinforcement
frames at the bottom of the base. When lifting with a forklift, also place the forks underneath the base.
Do not apply an impact on the package or let it bounce when putting it down.
Do not climb on top of the shipping box.
Do not put any load that may cause a deformation or breakage of the package.
7.2.2 Handling of Unpackaged Product
Secure the sliders to prevent sudden movement during transport.
external vibration.
If the actuator assembly is transported without the tips being secured, do not apply impact of 0.3G or
more.
In the case that the product needs to be carried up with ropes or another method, be sure to use an
appropriate cushioning to avoid the actuator being deformed or putting on an excessive pressure. And
also, be sure to keep the product in a stable and horizontal posture. Utilize the tapped holes on the
bottom of the base to attach a tool to suspend the product if necessary.
Be careful not to apply a load on any of the actuator brackets or covers or on the connector box. Also,
do not allow the cable to be pinched or deformed excessively.