IAI America ISWA - Manual (Page 41)

33
7. Setting the Home Position
7.4 How to Use the Homing Mark Stickers
‹ Attach these stickers to the product, as necessary, to indicate the home direction of the actuator, etc.
[1] For marking the home direction of the actuator
Sticker details
Homing mark stickers
s 1 sheet
Graduation mark sticker s 4 Mark sticker s 4
(The graduations are provided for 10 mm at a 1mm pitch.)
• Remove each sticker from the backing paper when use.
Notes 1. The back side is adhesive.
2. Remove dirt and oil from the attaching surface beforehand.
3. Avoid attaching the stickers over the caution labels.
Sticker details
Examples of use
Attach to the slider.
Attach to the slider.
Motor
Motor
Attach on the home side of the base.
Attach at desired moving positions.
[2] As positioning marks
v
[3] For displacement check
Attach to the slider.
Attach to the base.