IAI America ISWA - Manual (Page 32)

24
5. Installation
5.3 Mounting Load on Slider
x 7KHUHDUHWDSSHGKROHVLQWKHVOLGHUZKHUH\RXFDQDI¿[WKHORDG
To do this, follow the mounting procedure used for the main body.
x The slider has two reamed holes that are used to reproduce the correct position when the slider is
UHPRYHGDQGUHLQVWDOOHG8VHRQO\RQHRIWKHVHKROHVZKHQ¿QHWXQLQJRISHUSHQGLFXODULW\HWFLV
required.
Slider Tap Hole Diameter and Reamer Diameter (Top)
Machine Type
Tap
diameter
Tap depth A B C
Reamer
Hole
Reamer
Depth
Small Size M6 13mm 70mm - 110mm I6H10 10mm
Medium Size
M6 18mm - 70mm
140mm I8H10 10mm
M8 18mm 90mm -
Large Size M8 20mm 120mm 90mm 170mm I8H10 10mm
Bolt to
be used
Tightening Torque
In the case that steel is used for
the bolt seating surface:
In the case that aluminum is used for
the bolt seating surface:
M6 12.3N•m(1.26kg•m) 5.4N•m(0.55kg•m)
M8 30.0N•m(3.06kg•m) 11.5N•m(1.17kg•m)
"Top"