IAI America ISWA - Manual (Page 47)

39
10. Maintenance/Inspection
10.5 Cleaning the interior
x Wipe off dirt with a soft cloth.
x Wipe off the base oil when it is separated from the grease and appeared on the sides of the guide rail.
It may come out to the external if it is left without being wiped off.
x Do not spray compressed air on the actuator that might force dust into the crevices.
x Do not use petroleum-based solvents, neutral detergents or alcohol.
10.6 Grease Supply
10.6.1 Applicable Grease
Complex aluminum grease shown below is applied at our factory before delivery.
Applied Area
Grease at Delivery
Grease Name Supplier
Guide
Medallion FM Grease, consistency class 2 Taiyo Petroleum Gas Ball Screw
Wiper Seal
Grease Nipples
Wiper Seal
Ball Screw
Guide
CAUTION : Wipe off the old grease then supply new grease when much dirt is contained in the
old grease.