IAI America ISWA - Manual (Page 35)

27
5. Installation
5.5 Utilization of T-slot
There are T-slots (width of slot 4mm) in the base for mounting external devices such as a connector box.
When using the wiring kit, mount the connector box using these T-slots.
Use the slots as necessary to mount sensors or to anchor cables.
CAUTION : We recommend a square nut for the T-slot but you can also use a hexagonal nut.
When mounting, check the bolt length to make sure the end does not touch the
bottom of the T-slot. Be especially careful during tightening.
1.5
7.3
4.3
4.5
Square Head Nut
(Or Hexagon Nut)
Space between
bolt tip
Bolt
Mounting part