Ethernet specificications – Fairbanks NexWeigh User Manual
Page 9
Section1: General Information
04/14
9
51216 -- Rev. 6
1.3. ETHERNET SPECIFICICATIONS
FEATURE
DESCRIPTION
Models with
Ethernet
29937
31530
30718 (IP69K)
31531 (IP69K)
Interface
10Base-T/100BaseTX Ethernet port
Software selectable Ethernet speed 10/100/Auto
Software selectable Half/Full/Auto duplex
Connector
RJ45
Standards
ARP, UDP, TCP, ICMP, Telnet, TFT, AutoIP, DHCP, HTTP, SNMP
TCP, UDP, and Telnet, TFTP
Indicators (LED)
Power
10/100 Link/Activity – Green
100/100 Link/Activity – Green
Diagnostics – Red
Status – Green
CPU Processor
Lantronix DSTNI-EX 48 MHz clock
Memory
256 KB zero wait state SRAM, 2 MB Flash
Management
Lantronix Device Installer GUI, Serial login, SNMP, Telnet login, HTTP
Operating
Temperature
-40° to 70° C (-40° 158° F)
Storage
Temperature
-40° to 78° C (-40° 185° F)
Serial Port
15 KV ESD protection on RS232 and RS422/485 transceivers
Power Input
Up to non-repeated 600 W 10/100 µsec pulse protection against
transient over voltages.
Ethernet Port
1500 VAC isolation shield with shield connected to chassis ground for
signal integrity and ESD protection.