Fairbanks NexWeigh - Manual (Page 55)

Section 5: Serial I/O
04/14 55 51216 -- Rev. 6
5.4.8. NexWeigh Serial Commands and Definitions,
Continued
qq) Set Output Time Enable
Definition: Used to set the Output Scale Time enable parameter for the scales serial
output stream.
Command: ‘SOT’ ‘mode’
Options: E,D
Sample Command: "SOT E\r"
rr) Set Output Date Enable
Definition: Used to set the Output Scale Date enable parameter for the scales serial
output stream.
Command: ‘SOD’ ‘mode’
Options: E,D
Sample Command: "SOD E\r"
ss) Set AutoPrint AutoAccumulate Out Enable
Definition: Used to set the Auto Print Auto Accumulate Out enable parameter for the
scale.
Command: ‘SAA’ ‘mode’
Options: E,D
Sample Command: "SAA E\r"
tt) Set Output Format
Definition: Used to set the Output Scale Format parameter for the scales serial
output stream. GTN or NET only
Command: ‘SOF’ ‘mode’
Options: GTN, NET
Sample Command: "SOF GTN\r"
Sample Command: "SOF NET\r"
uu) Set AutoPrint Threshold
Definition: Used to set the Auto print threshold limit in divisions.
Command: ‘SAP’ ‘divisions’
Options: Integer value
Sample Command: "SAP 10\r"