Fairbanks NexWeigh - Manual (Page 63)

04/14 63 51216 -- Rev. 6
Section 6: Operations
6.1. BASIC SCALE OPERATIONS
Upon power up the Instrument performs a warm-up cycle.
•
The Instrument initiates a test, displaying numbers 1 to 8 , and lights up all LED’s.
•
The Program number and Revision Information displays.
• The Instrument then displays the current weight on the scale
6.2. KEYPAD FUNCTIONS, WEIGH MODE
KEY ACTION
Recipe 1-4 Enables or disables programmed recipe in Checkweigh mode.
• In peak weigh mode, 1 enables peak, 2 disables, and 3 resets peak.
TARE Automatically tares off the displayed weight.
• If held for 3 seconds, enables or disables accumulate function.
ZERO Resets gross weight to center of zero.
PROGRAM/ENTER Captures weight and adds to accumulation if enabled.
OVER/UNDER/NEXT Displays accumulated weight and number of weighments if enabled.
• If held for 3 seconds, enters Checkweigh or peak weight setup.
UNITS Switches between selected weighting units.
• If held for 3 seconds, enters 4-20mA parameters if enabled.
B/G – NET Toggles between GROSS and NET WEIGHTS.
• If held for 10 seconds, displays audit trail functions.
PRINT Transmits transaction data out COM port 1 if button is selected.