Fairbanks NexWeigh - Manual (Page 68)

Section 6: Operations
04/14 68 51216 -- Rev. 6
6.3.5. Weight Accumulation, Continued
G. Clearing Accumulated Weight and Total.
1. With total/count displayed (see Displaying accumulated weight and count
above), Press ZERO .
2. The instrument will display CLr n prompting the operator to not cleat total
count and accumulation. If the totals are to be cleared, toggle to display CLr
Y by pressing
OVER/UNDER/NEXT . With the correct choice displayed,
press PROGRAM/ENTER .
3. The instrument will briefly display CLEArd when the accumulator is cleared.
H. Printing Accumulated Weight and Total.
4. With total/count displayed (see Displaying accumulated weight and count
above), Press PRINT .
5. Instrument will display ALL Y, prompting the operator to print all the individual
weighments and the total accumulation. If only the totals are desired, toggle to
display ALL n by pressing
OVER/UNDER/NEXT . With the correct choice
displayed, press PROGRAM/ENTER .
6. The instrument will print the accumulated weighments, if selected, followed by
the total.
7. After the print has occurred, the instrument will display CLr n prompting the
operator to not cleat total count and accumulation. If the totals are to be
cleared, toggle to display CLr Y by pressing
OVER/UNDER/NEXT . With
the correct choice displayed, press PROGRAM/ENTER .
8. The instrument will briefly display CLEArd when the accumulator is cleared.
I. Deactivating Accumulation
To deactivate the accumulation mode, press and hold TARE for 3 seconds. The
instrument will display ACCoFF briefly to indicate accumulation function has been
deactivated.