Fairbanks NexWeigh - Manual (Page 14)

Section 3: Installation
04/14 14 51216 -- Rev. 6
3.1.2. Unpacking
Follow these guidelines when unpacking all equipment:
•
Check in all components and accessories according to the customer's order.
•
Remove all components from their packing material, checking against the invoice
that they are accounted for and not damaged.
─ Advise the shipper immediately, if damage has occurred.
─ Order any parts necessary to replace those which have been
damaged.
─ Keep the shipping container and packing material for future use.
Check the packing list.
•
Collect all necessary installation manuals for the equipment
and accessories.
•
Open the equipment and perform an inspection, making certain
that all hardware, electrical connections and printed circuit
assemblies are secure.
•
Do not reinstall the cover if the final installation is to be performed after the pre-
installation checkout.
3.1.3. Finding the Best Location
Position the equipment with these points in mind:
•
Intense direct sunlight can harm the display.
•
Do not locate near magnetic material or equipment/Instruments which use
magnets in their design.
•
Avoid areas which have extreme variations in room temperatures. Temperatures
outside the Instrument’s specifications will affect the weighing accuracy of this
product.
•
Do not open the Instrument if there is any evidence of damage to it or any other
scale component or supporting structure.
•
When selecting the right location for the Instrument and the scale, keep the
components completely away from all high water, such as low-lying areas that
may flood, and away from any drain pipes.