Fairbanks NexWeigh - Manual (Page 40)

Section 5: Serial I/O
04/14 40 51216 -- Rev. 6
5.4.4. Okidata 186T Form Printer, Continued
Printed menu’s changes per Printer Emulation Mode. If printer emulation mode is
NOT set to ML, set this first, then reprint the menu. Then set menu as follows:
(GROUP)
(ITEM) (SET)
(press LINE FEED (press FORM FEED (press TOF SET
to change) to change) to change)
Printer Control
Emulation Mode ML
Font
Print Mode Utility
Font DRAFT Mode SSD
Font Pitch 10 CPI
Font Proportional Spacing No
Font Style Normal
Font Size Single
Symbol Sets
Character Set Standard
Symbol Sets Language Set American
Symbol Sets Zero Character Slashed
Symbol Sets Code Page USA
Vertical Control Line Spacing 6 LPI
Vertical Control Skip Over Perforation No
Vertical Control Page Length 11”
Set-Up
Graphics Bi-directional
Set-Up 7 or 8 Bits Graphics 7
Set-Up Receive Buffer Size 128K
Set-Up Paper Out Override No
Set-Up Paper Registration 0
Set-Up 7 or 8 Bits Data Word 8
Set-Up Operator Panel Function Full Operation
Set-Up Reset Inhibit No
Set-Up Print Suppress Effective Yes
Set-Up Auto LF No
Set-Up Print DEL Code Yes
Set-Up Time Out Print Invalid
Set-Up Auto Select No
Set-Up Impact Mode Normal
Parallel I/F
I-Prime Buffer Print
Parallel I/F Pin 18 +5v
Parallel I/F Bi-Direction Enable