Fairbanks NexWeigh - Manual (Page 12)

Section 2: Service Policy Information
04/14 12 51216 -- Rev. 6
2.2.1. Service Technician’s Responsibilities
•
All electronic and mechanical calibrations and/or
adjustments required for making this equipment
perform to accuracy and operational specifications are
considered to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result
of the equipment's inability to be adjusted or
calibrated to performance specifications may be
charged to warranty.
•
The equipment consists of printed circuit assemblies which must be handled
using ESD handling procedures, and must be replaced as units.
─ Replacement of individual components is not allowed.
─ The assemblies must be properly packaged in ESD protective material and
returned intact for replacement credit per normal procedures.
2.2.2. Users’ Responsibility
Absolutely no physical, electrical or program modifications other
than selection of standard options and accessories are to be
made to this equipment.