beautypg.com

Overall steps, Introduction – Fairbanks NexWeigh User Manual

Page 19

background image

04/14

19

51216 -- Rev. 6

Section 4: Programming Configuration

4.1. OVERALL STEPS

Follow these steps to program the NexWeigh Instrument.

A. Configure the NexWeigh Instrument operating parameters.

B. Calibrate the NexWeigh Instrument.

C. Set up the NexWeigh Instrument options.

4.2. INTRODUCTION

The program group is shown and accessed in steps.

Each program group may be entered and modified, or skipped to the next group.

At each step, a word or abbreviation displays, indicating the parameter to be set.

Each step then may be viewed or modified.

At the end of programming a SAvE prompt will be displayed.

Press

PROGRAM/ENTER

to SAvE and exit or scroll to CAncEL to disregard

changes made.

The following is a rendering of the four programming groups. Pressing

OVER/UNDER/NEXT

or

TARE

will scroll through the choices listed.

PROGRAM/ENTER

will enter the program steps in a particular group. See chart

in Sec 4.3 for full details of front panel pushbuttons for programming mode.

SEtuP

ConFiG

APP

CAL

donE

SAvE

CAncEL