Luminex 100 IS Developer Workbench Guide Version 2.3 - Manual (Page 44)

Luminex 100 IS Developer Workbench Guide Version 2.3
x
MAP Technology
38 PN 89-00002-00-084 Rev. B
2. Select the template to edit (the template ID cell displays lock
icon) and click Edit. The Select Template Information wizard
displays showing the selected template. See Figure 28.
Figure 28. Select Template Information
3. Edit the Template Name and assign a new Version no. to the
template.
4. Locate the information to change using Next and Back at the
bottom of the Template Setup wizard.
5. Change the template information or settings and click Save, then
click Close to exit. The system saves the changes.
Delete Templates
There are two template delete procedures:
• Delete an unused template (no associated batches)
• Delete a used template (with associated batches)
Delete an Unused
Template
An unused template has no associated batches.
‹
To delete an unused templates:
1. At the Acq. Detail tab, click Edit Template on the Developer
Workbench toolbar. The Open Template dialog box displays. See
Figure 29.
Cybergenlabs
Pete B.
Protein Map
Protein, A, B, C
1.23