Luminex 100 IS Developer Workbench Guide Version 2.3 - Manual (Page 39)

x
MAP Technology
Create Template
PN 89-00002-00-084 Rev. B 33
15. After you enter all the information into the template, click Save
and then click Close.
Figure 22. Select Template Commands
Maintenance Template
Create a maintenance template to facilitate your startup procedure,
shutdown procedure, troubleshooting, or calibration.
Ensure that the maintenance template you create is consistent with
the Luminex 100 analyzer operations and maintenance requirements.
See the Luminex 100 IS System Manual Version 2.3 for more
information.
‹
To create a Maintenance template:
1. Click Create Template on the Developer Workbench toolbar.
The Template Setup wizard opens. See Figure 23.
2. Type the correct information in the Developing Company,
Created By, Template Name Version No, and Description
boxes. The version number of the template is automatically