Luminex 100 IS Developer Workbench Guide Version 2.3 - Manual (Page 40)

Luminex 100 IS Developer Workbench Guide Version 2.3
x
MAP Technology
34 PN 89-00002-00-084 Rev. B
included in the template name that the lab personnel see when
they select the template to use with a kit.
Figure 23. Template Setup Wizard—Create a Maintenance Template
3. Under Template Type, select Maintenance.
4. Use the default settings for Sample Volume, Sample Timeout,
and Doublet Discriminator Gate.
5. Enter the target XY Heater Temp (°C) for this template if
appropriate. To enable this value, enter an XY Htr On or an XY
Htr On (wait) command into the Template Commands list. Click
Next to continue. See Figure 24.