Luminex 100 IS Developer Workbench Guide Version 2.3 - Manual (Page 34)

Luminex 100 IS Developer Workbench Guide Version 2.3
x
MAP Technology
28 PN 89-00002-00-084 Rev. B
15. Click Next to continue with the Select Template Commands. See
Figure 17.
Figure 17. Select Template Commands
16. In the Available Commands list, click the desired commands
then click the single right arrow (>) to add them to the Template
Commands list. Type a value in the Repeat box to add multiple
instances of a command. Click the left arrow (<) to remove the
command.
These commands become part of the template and are always
performed in the order specified. Each well command is
Table 4: Algorithm Formulas
Qualitative
Analysis Method
Algorithm
Default
Values
Default
Ranges
Lum Qual Formula 0 to .9
.9 to 1.1
1.1 to 50
negative
low positive
high positive
Adv Qual Formula 0 to 20
20 to 40
40 to 60
60 to 100,000
negative
low positive
moderate
strong positive
Where: FI = fluorescent intensity
Ki = lot information for each test
FI
sample
FI
s dard tan
------------------------- Ki
×
FI
sample
FI
s dard tan
------------------------- Ki
Ч