Luminex 100 IS Developer Workbench Guide Version 2.3 User Manual
Page 37

x
MAP
Technology
Create Template
PN 89-00002-00-084 Rev. B
31
Figure 19. Enter the Number of Tests
9. Type the number of desired tests in the Tests box. Press Enter on
the keyboard. A blank entry for each test displays in the adjacent
area (each test is an analyte bound to a unique bead set).
10. For each test, type the appropriate information in the Name,
Units, and Description boxes. Click Apply Units to apply the
same unit shown on the first line to all other tests. See Figure 20.
Figure 20. Define Test Parameters
11. Select the Bead ID for each test. Type the bead number or click
in the Bead ID column to select it from the drop-down chart.