Clear-Com i-Series Panels - Manual (Page 9)

Clear-Com Communication Systems
I-Series Instruction Manual i i i
IMPORTANT SAFETY
INSTRUCTIONS
For your safety, it is important to read and follow these
instructions before operating an i-series panel:
(1) WARNING: To reduce the risk of fire or electric shock, do not
expose an i-Series panel to rain or moisture. Do not operate an
i-Series panel near water, or place objects containing liquid on it. Do
not expose an i-Series panel to splashing or dripping water.
(2) For proper ventilation, make sure ventilation openings are not
blocked. Install the i-Series panel according to the directions in the
Installation Chapter of this manual.
(3) Do not install an i-Series panel near a heat source such as a
radiator, heat register, stove, or other apparatus (including amplifiers)
that produces heat. Do not place naked flame sources such as candles
on or near an i-Series panel.
(4) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades, with one blade wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
(5) Protect the power plug from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the i-Series panel’s chassis.
(6) Only use attachments/accessories specified by Clear-Com
Intercom Systems.
(7) Unplug the i-Series panel during lightning storms or when unused
for long periods of time.
(8) Refer all servicing to qualified service personnel. Servicing is
required when:
• The i-Series panel has been damaged in any way, such as when
a power-supply cord or plug is damaged.
• Liquid has been spilled or objects have fallen into the i-Series
panel’s chassis.
• The i-Series panel has been exposed to rain or moisture.
• The i-Series panel does not operate normally.
• The i-Series panel has been dropped.
Please familiarize yourself with the safety symbols in Figure 1. When
you see these symbols on an i-Series panel, they warn you of the
potential danger of electric shock if the i-Series panel is used
Please read and follow
these instructions
before operating an
i-Series panel.