Clear-Com i-Series Panels - Manual (Page 49)

Clear-Com Communication Systems
I-Series Instruction Manual 3 - 9
6. After you have completed assigning keys, exit “pick list scroll” mode
by pressing the ESCAPE key (labeled “*RED”). To exit the current
menu only, and return to the previous menu, press the
FUNCTION-CLEAR key (labeled “0 CLR”).
Note: If PIN codes are set up in the Eclipse Configuration System
you must enter one of the four possible 4-digit PIN codes
before entering Local Key Assignment mode. The display
will ask for the PIN code at which time you must enter the
correct 4-digit code.
To clear a key’s “talk” assignment on your panel:
1. Press the “5” key on the numeric keypad to enter “pick list scroll”
mode.
• A list of current talks (destinations) in the system is displayed
starting in the leftmost key module’s display window.
• The first item on the talk list is “clear.” It should be highlighted to
indicate that it is available to be selected.
2. When the word “clear” is highlighted in the display, select it by
pressing in and releasing the VOL/PROG knob.
The leftmost module’s display window will revert to showing
currently assigned sources and destinations.
3. Tap the key with the talk assignment that you want to clear.
You will hear a confirmation tone of two loud beeps to indicate that
the key’s assignment is cleared. The key’s label will disappear from
the display and the key itself will not illuminate.
To clear a key’s “listen” assignment on your panel:
1. Press the “5” key on the numeric keypad to enter “pick list scroll”
mode.
A list of current talks (destinations) in the system is displayed
starting in the leftmost key module’s display window.
2. To display a list of all listens (sources) in the system, press the
LISTEN key.
A list of current listens (sources) in the system is displayed starting
in the leftmost key module’s display window.
3. The first item in the listens list is “clear.” It should be highlighted to
indicate that it is available to be selected.
4. When the word “clear” is highlighted in the display, select it by
pressing in and releasing the VOL/PROG knob.
The leftmost module’s display window will revert to showing
currently assigned sources and destinations.
5. Tap the key with the listen assignment that you want to clear.
You will hear a confirmation tone of two loud beeps to indicate that
the key’s assignment is cleared. The key’s label will disappear from
the display and the key itself will not illuminate.