beautypg.com

Figure 1-12 adjusting listen levels method 1 -20 – Clear-Com i-Series Panels User Manual

Page 30

background image

Clear-Com Communication Systems

I-Series Instruction Manual

1 - 2 0

6. Press and release the listen key.

The source’s volume is now set at the required level.

Note: If you try to push an active listen path higher than the

maximum possible volume, you will drive the volume of all
other active paths downward, thus putting more emphasis
on the desired path.

Figure 1-12: Adjusting Listen Levels Method 1

To adjust the listen level of an incoming source (Method 2):

The listen level may also be adjusted using the Local Preferences
facility (requires a 16-button key module).

This method works only with a 16-button function key module.
1. Press the ENTER key (labeled “#GRN”) on the numeric keypad to

display a list of menu items.
The first two menu items appear in the panel’s leftmost display. (For
an illustration of this procedure, see Figure 11.)

2. Scroll to menu item number 7, “Local Preferences,” by rotating the

VOL/PROG knob.
You can also scroll through the menu items one at a time by
pressing the CLEAR key to scroll up the menu and the ANSWR key
to scroll down the menu.

3. Select item 7 by pressing the VOL/PROG knob in, as if it were a key,

when item 7 appears in the display.

• Another menu—a submenu—appears in the display.

• You can also select item number 7 simply by pressing the 7 key on

the numeric keypad.

4. Scroll though the submenu to item number 5, “Listen Level Adjust,”

and select it by pressing the VOL/PROG knob in, as if it were a key.

• The words “Listen Level” appear in the panel’s leftmost display to

indicate that you are in listen-level-adjust mode.

1

2

Press and release the VOL/PROG knob.

4

Rotate the VOL/PROG knob clockwise to increase the

volume, and counterclockwise to decrease it.

3

Press and release the listen key again.

5

When you reach the desired volume, press and

release the VOL/PROG knob to accept the setting.

6

Press and release the listen key. The new

volume is now set.

Press and release the desired listen key.

The VOL/PROG knob

operates in two ways. You

rotate the knob clockwise or

counterclockwise to adjust

volume levels or to scroll

through menu items. You

press the knob in, as if it

were a key, to select items in

a menu.