Clear-Com i-Series Panels - Manual (Page 31)

Clear-Com Communication Systems
I-Series Instruction Manual 1 - 2 1
• You can also select submenu item number 5 simply by pressing
the 5 key on the numeric keypad.
Note: To quickly enter listen-level-adjust mode, simply press
three keys in quick succession: the ENTER key (labeled
“#GRN”), followed by the 7 key, followed by the 5 key. The
words “Listen Level” will appear in the panel’s leftmost
display to indicate that you have entered the mode for
adjusting listen levels. Then proceed forward from step 5
below.
5. Tap any listen key or talk-with-listen key to select it.
The key will glow bright green to indicate that you have selected it.
6. Rotate the VOL/PROG knob clockwise to increase the source’s
volume or counterclockwise to decrease the source’s volume.
7. Continue adjusting listen levels by first tapping a key to select it, and
then rotating the VOL/PROG knob to adjust the source’s volume.
8. Press the ESCAPE key (labeled “*RED”) to exit listen-level-adjust
mode.
You can also exit listen-level-adjust mode by not pressing a key on
the numeric keypad (0–9, *, #) for five seconds. After five seconds
the mode times out.
Figure 1-13: Adjusting Listen Levels Method 2
To adjust the listen level of an incoming source (Method 3):
1. To adjust a bright-green lighted key’s listen level, press 1 on the
numeric keypad.
2. Rotate the VOL/PROG knob clockwise to increase the source’s
volume or counterclockwise to decrease the source’s volume.
Resetting Listen Levels to the Default Level
You can reset all listen levels to the default, which is the highest
possible volume.
Press the #GRN key.
The first two items of a list appear in the panel's leftmost display. 1
2 Scroll to item #7 "Local Preferences"
by rotating the VOL/PROG knob.
3 Press the VOL/PROG knob in to select item #7.
4 Scroll through the submenu to item #5
"Listen Level Adjust" and select it by pressing
the VOL/PROG knob in.
5 Tap any listen key or talk-with-listen key to select it.
6 Rotate the VOL/PROG knob clockwise to increase the source's volume
or counterclockwise to decrease the source's volume.
To quickly enter listen-level adjust mode, simply press three
keys in quick succession: #GRN, 7, 5. The words "listen level" will
appear in the panel's leftmost display. Then proceed from step 5.
SHORTCUT