Clear-Com i-Series Panels - Manual (Page 70)

Clear-Com Communication Systems
I-Series Instruction Manual
5 - 2
Figure 5-2: Two v-stations control and display listen levels for one
i-Series panel
Figure 5-3: Connecting two v-stations to an i-Series panel
The first connected v-station controls listen levels for sources assigned to the upper row of keys
on an i-series.
The second v-station controls listen levels for sources assigned to the lower row of keys
on an i-series
TO MATRIX
AC - IN
90 - 245 V
J5A/GPI
PROG
J 6
SPKR OUT
J 7
LINE
HMO J 8 J 9 MIC J 10
J 1
J 2 J 3
J5B/RELAY
OUT
i-Series Panel
AC - IN
90 - 245 V
J 1 J 2
Level-Control Panel
AC - IN
90 - 245 V
J 1 J 2
Level-Control Panel
1
2
1. Connect the OUT connector of the main i-Series panel (A) to the IN connector of the first v-station expansion panel (B).
2. Connect the OUT connector of the first v-station expansion panel (B) to the IN connector of the second v-station expansion panel (C).
*NOTE: The connectors are actually labeled "expansion out" and "expansion in," but have been shortened to IN and OUT on the
diagram for clarity.
C
A
B
Connecting an i-Series Panel to two v-Station Expansion Panels ...
IN OUT
IN OUT