Clear-Com i-Series Panels - Manual (Page 63)

Clear-Com Communication Systems
I-Series Instruction Manual 4 - 7
assigned to the keys along with the audio functions are now also only
activated when signaled by the remote device.
You can, however, activate a talk path on any key by pressing and
holding the key in momentary mode while you talk. The PTT: Activate
All Talk Keys function only affects latched keys.
Activate Talk Switch #1
The “Activate Talk Switch #1” function allows you to set up an external
logic device, such as a panel-mounted switch, a foot switch, or the
logic output of some other device, to activate the panel’s upper
leftmost talk key.
To use a logic device to activate the panel’s leftmost talk key:
1. Select the “Activate Talk Switch #1” option in the Eclipse
Configuration System.
2. Connect a logic device (such as a foot switch, a panel-mounted
switch, or the logic output of another device) to the i-Series panel’s
GPI connector.
3. Switch on the logic device to activate the panel’s upper leftmost talk
key.
This feature is momentary only, so that you must press and hold the
logic device’s switch to activate the panel’s talk key. When you
release the switch, the panel’s talk key is no longer activated. The
panel’s talk key cannot be latched with the Activate Talk Switch #1
option.
Activate Talk Switch #2
The “Activate Talk Switch #2” function allows you to set up an external
logic device, such as a panel-mounted switch, a foot switch, or the
logic output of some other device, to activate the panel’s second upper
leftmost talk key (the key directly to the right of the leftmost upper key).
To use a logic device to activate the panel’s second upper left-
most talk key:
1. Select the “Activate Talk Switch #1” option in the Eclipse
Configuration System.
2. Connect a logic device (such as a foot switch, a panel-mounted
switch, or the logic output of another device) to the i-Series panel’s
GPI connector.
3. Switch on the logic device to activate the panel’s second upper
leftmost talk key.
This feature is momentary only, so that you must press and hold the
logic device’s switch to activate the panel’s talk key. When you
release the switch, the panel’s talk key is no longer activated. The
panel’s talk key cannot be latched with the Activate Talk Switch #2
option.