beautypg.com

Listen level reset, Gooseneck microphone volume level, Listen level reset -11 – Clear-Com i-Series Panels User Manual

Page 51: Gooseneck microphone volume level -11, Local preference options listen level reset

background image

Clear-Com Communication Systems
I-Series Instruction Manual

3 - 1 1

3. When the desired item appears in the display above the ANSWR

key, select it either by pressing the VOL/PROG knob in, or by
pressing the ENTER key (labeled “#GRN”).

4. Follow the directions in the display. Additional instructions for setting

individual local preferences are given following step 5. Go to the
section for the individual local preference you are adjusting.

5. To exit “local preferences” mode, press the ESCAPE key (labeled

“*RED”) on the function keypad module. To return to the previous
menu without saving any changes, press the “0” key (labeled
“CLR”). You can also select “exit” from the local preferences menu
to exit “local preferences” mode.

LOCAL PREFERENCE OPTIONS

Listen Level Reset

When you select Listen Level Reset, all listen keys are reset to the
default level which is the highest possible volume. The leftmost display
on the panel will read: “Listen Level Reset Sent to Matrix” for one
second. Proceed to step 4 to exit “local preferences” mode.

Gooseneck Microphone Volume Level

When you select this menu item, the leftmost display on the panel
shows the current gooseneck microphone volume level, with choices
for increasing or decreasing it. For example, the display may read:

Set Gooseneck Mic Volume Level
+2 dB with increase/decrease choices of:
(+7,+6,+5,+4,+3,+2,+1,0-1,-2,-3,-4,-5,-6,-7,-8)

In this example, the current gooseneck volume level is 2 dB. To
increase the volume, press the ANSWR key. To decrease the volume,
press the CLEAR key. Each time you press either the ANSWR key or
the CLEAR key, you change the volume level by one increment. The
selected volume level is highlighted in the display. You can also
change the volume level by rotating the VOL/PROG knob.

When you reach the desired volume level, press either the ENTER key
(labeled “#GRN”), or press the VOL/PROG knob in, as if it were a key,
to save the information. Then exit “local preferences” mode.

The default outgoing microphone audio level is the highest possible
level of +7 dB.

Note: As you scroll through the volume-level scale, you will hear

the gooseneck microphone’s volume level change
accordingly. To make the change permanent however, you
must select the desired value on the scale by either
pressing in the VOL/PROG knob or by pressing the ENTER
key (labeled “#GRN”) when the value appears in the display.

As you scroll through

gooseneck microphone,

headset microphone, and

sidetone volume levels, you

will be able to hear the

increasing or decreasing

volume levels. To make the

change permanent, however,

you must select the desired

volume level when it appears

in the display by pressing the

ENTER key or the

VOL/PROG knob.