Clear-Com i-Series Panels - Manual (Page 88)

Clear-Com Communication Systems
I-Series Instruction Manual 7 - 4
No speaker audio from the
external program feed. 1. Program volume knob (labeled
VOL/PROG) is not turned up.
2. Program source is not producing
audio. 1. Turn up VOL/PROG knob.
2. Check program source.
3. Reset the panel.
4. Replace the panel.
The headphone is not receiv-
ing audio from the external
program feed. 1. Program may have been dis-
abled for the second program feed
in Eclipse Configuration System. 1. If the external program feed is
audible in the speaker, check
Eclipse Configuration System to
make sure the program was not
disabled for the second earphone
feed.
2. Replace the panel.
SYMPTOM CAUSE SOLUTION