Clear-Com i-Series Panels - Manual (Page 19)

Clear-Com Communication Systems
I-Series Instruction Manual 1 - 9
Figure 1-7: Standard Panels 2
The i-1470E panel is the same as the i-1430E panel with the addition
of a AUX-101 option card fitted. The other main panels (but not the
expansion panels) may also have the AUX-101 option card fitted.
START-UP SEQUENCES
NON-DISPLAY KEY MODULE START-UP SEQUENCE
When a panel with non-display key modules is connected to power, all
keys on each key module will flash red, then green, and will revert to
their programmed colors (red for talk or talk-with-listen; green for
listen). If there is no communication to the Eclipse matrix, the keys will
flash red once per second until communication to the matrix is
established.
DISPLAY KEY MODULE START-UP SEQUENCE
When a panel with display key modules is connected to power, each of
the display modules will show the following message:
Clear-Com
Vx.x.x@2000
“V.x.x.x” represents the firmware version of the panel. All keys will flash
red, then green, and will show their programmed colors and labels if
there is communication to the matrix.
i1210E Intercom Panel
2 Display Key Modules
Function Key Module without Keypad
e1410E Key Expansion Panel
4 Display Key Modules