Clear-Com i-Series Panels - Manual (Page 52)

Clear-Com Communication Systems
I-Series Instruction Manual
3 - 1 2
Headset Microphone Volume Level
When you select Headset Microphone Volume Level from the menu,
the leftmost display on the panel shows the current headset
microphone volume level, with choices for increasing or decreasing it.
For example, the display may read:
Set HS Mic Volume Level
+2 dB with increase/decrease choices of:
(+7,+6,+5,+4,+3,+2,+1,0,-1,-2,-3,-4,-5,-6,-7,-8)
In the example above, the current headset volume level is 2 dB. To
increase the volume, you press the ANSWR key, and to decrease the
volume, you press the CLEAR key. Each time you press either the
ANSWR or CLEAR key, you change the volume level by one
increment. The selected volume level is highlighted in the display. You
can also change the volume level by rotating the VOL/PROG knob.
When you reach the desired volume level, either press the ENTER key
(labeled “#GRN”), or press the VOL/PROG knob in, as if it were a key,
to save the information. Then exit “local preferences” mode.
The default outgoing microphone audio level is the highest possible
level of +7 dB.
Note: As you scroll through the volume-level scale, you will hear
the headset microphone’s volume level change accordingly.
To make the change permanent however, you must select
the desired value on the scale by either pressing in the
VOL/PROG knob or by pressing the ENTER key (labeled
“#GRN”) when the value appears in the display.
Sidetone Volume Level
When you select Sidetone Volume Level from the display, the leftmost
display on the panel shows the current sidetone level, with choices for
increasing or decreasing it. For example, the display may read:
Set Sidetone Volume Level
+10 dB with increase/decrease choices of:
(+30, +28, +26, +24, +22, +20, +18, +16, +14, +10, +8, +6,
+4, +2, 0)
In this example, the current sidetone level is 10 dB. To increase the
sidetone, you press the ANSWR key, and to decrease the sidetone,
you press the CLEAR key. Each time you press either the ANSWR or
CLEAR key, you increase the sidetone level by one increment. The
selected volume level is highlighted in the display. You can also
change the sidetone level by rotating the VOL/PROG knob.
When you reach the desired volume level, either press the ENTER key
(labeled “#GRN”), or press the VOL/PROG knob in, as if it were a key,
to save the information. Then exit “local preferences” mode.