Clear-Com i-Series Panels - Manual (Page 42)

Clear-Com Communication Systems
I-Series Instruction Manual
3 - 2
OVERVIEW OF ADVANCED FEATURES
Table 3-1: Advanced Key Functions
TELEPHONE DIALING FROM THE KEYPAD (#1 KEY)
You can dial from the keypad on a function key module as if you were
dialing from a standard telephone keypad. When you press the
number keys, standard DTMF tones are generated to all active talk key
destinations. Note that this feature is only available when the central
matrix is connected and online.
KEY FUNCTION DESCRIPTION
1 Dial Enters telephone dialing mode.
2 Local Exclusive Enters mode to temporarily deactivate all
keys except the one being used.
3 Local Page
Override Enters mode to override current on/off and
volume settings at a destination.
4 IFB, Party Line
and Fixed
Group assign-
ment Enters the setup mode for IFB, Party Line
and Fixed Group to allow sources to be
assigned as IFBs, or to Party Lines or Fixed
Groups.
5 Local Key
Assignments Enters mode to assign sources and desti-
nations in the system to keys on your
panel.
6 Swap Page Switches between the panel main page and
the swap page.
7 Local Prefer-
ences Enters the setup mode to adjust Listen
Level Reset, Panel Mic Level, Headset Mic
Level, Sidetone Level and Listen Level
Adjust.
9 Port Information Gives you the panel’s port number, label,
associated CPU card, and current firmware
version number.
0 CLR Clear Clears the current display entry and takes
you back to the previous menu.
* RED Escape or Can-
cel Abandons all unsaved programming and
returns the panel to normal use.
# GRN Enter Saves the current programming changes
and reverts the panel to normal use.
VOL/PROG
KNOB
Display Con-
trast Adjust
Baud Rate
Adjust Allows you to adjust contrast lighting on dis-
plays and to adjust the panel’s baud rate