Clear-Com i-Series Panels - Manual (Page 45)

Clear-Com Communication Systems
I-Series Instruction Manual 3 - 5
• Press the “4” key. The “CLEAR” key will illuminate red and “IFB”
will be displayed below it.
• To access Party Line mode press the “CLEAR” key. “PL” will be
displayed below it.
• To access Fixed Group mode press the “CLEAR” key again. “FG”
will be displayed below it.
• Pressing the “CLEAR” key again will exit assign mode.
Setting Up IFB Sources and Destinations on an
i-Series panel
Only Global IFBs with Talk are valid as IFB destinations and only
sources with listen are valid to be assigned to an IFB.
1. Press the “4” key so that the “CLEAR” key illuminates red and “IFB”
is displayed below it.
2. All valid IFB destinations will flash red.
3. Press the front-panel button for the required IFB destination. Its light
turns solid red, while all valid sources’ lights blink green.
4. Press a source’s button to assign it to the destination. Its light turns
solid green. Pressing the button again deactivates the assignment.
5. Repeat steps 3 and 4 until all sources are assigned to the IFB
destination.
6. Press the “CLEAR” button three times to exit IFB mode.
Setting Up Party Line members on an i-Series panel
Only Talk and Listen keys are valid as members of a Party Line.
1. Press the “4” key so that the “CLEAR” key illuminates red and “IFB”
is displayed below it.
2. Press the “CLEAR” key so that “PL” is displayed below it.
3. All available Party Lines flash red.
4. Press the key for the desired Party Line.
5. The key’s light becomes solid red and all available members’ lights
flash green.
6. Press a key with the associated flashing green light of an available
member to add it to the Party Line.
7. The light becomes solid green to indicate the member has been
added to the Party Line.
8. To remove a member from the Party Line, press that member’s key.
The solid green light associated with that key blinks green to
indicate it is now available.
9. Repeat steps 6 and 7 until the Party Line contains all desired
members.
10. Press the “CLEAR” key twice to exit Party Line mode.