B&K Precision 2552-2559 - Manual - Manual (Page 99)

99
5. Press the “New folder” button to create a new folder
6. Press the “Del folder” option button to delete a folder
7. Press the “Modify” option button to modify a folder.
8. Press the “New file” option button to create a new file
9. Press the “Del file” option button to delete a file
10. Press “the next page” option button and press the “Rename”
option button to modify the name of the file or the folder.
11. Turn the “Universal” knob to select the folder and press the
“Confirm” option button and you will save the set to the USB
drive.
To Recall setup data from USB flash drive, follow the steps below:
1. Press the “SAVE/RECALL” button.
2. Press the “Type” button to select “Setups”.
3. Insert USB flash drive to USB host port of the oscilloscope and
wait until the oscilloscope has initialized USB flash drive (about
five seconds).
4. Press the “Save to” option button to select “File”.
5. Press the “Save” option button, then you will go into the
Save/Recall interface.
6. Choose the file you want then press the “Load” option button
(within 5 seconds there will be a message “Read data success”).
Now the setup data have been recalled from the USB flash drive.
• Recall Factory
You can use this option to recall factory settings.
Table 44 - Factory Function Menu
Option Setting Description
Type Factory To view the Factory setup.
UpdateCfg
Load Recall the Factory setup.