B&K Precision 2552-2559 - Manual - Manual (Page 57)

57
Figure 32 - Video Trigger Screen
Table 19 - Functional Menu of Video Trigger 2
Option Setting Description
Type Video Select the video type
trigger. Set the coupling to
AC to trigger the NTSC,
PAL and SECAM video
signal.
Standard NTSC
Pal/Secam
Select the video standard for sync
and line number count.
Mode Auto Use this mode to let the
acquisition free-run in the absence
of a valid trigger. This mode
allows an untriggered, scanning
waveform at 100 ms/div or slower
time base setting.
Normal Use this mode when you want to
see only valid triggered
waveforms. When you use this
mode, the oscilloscope does not
display a waveform until after the