B&K Precision 2552-2559 - Manual - Manual (Page 105)

105
.CSV file.
Data Depth Displayed
Maximum
Set to store displayed waveform data to
.CSV file.
Set to store maximum waveform data to
.CSV file.
Para Save On
Off
Set whether to include waveform
parameters in the .CSV file or not.
Save Go to the SAVE ALL menu.
Figure 63 - Save to CSV Screen
To save CSV files to USB flash drive, follow the steps below:
1. Press the “SAVE/RECALL” button to enter “SAVE/RECALL”
menu.
2. Press the “Type” option button to select “CSV”.
3. Insert USB flash drive to USB host port of the oscilloscope and
wait that the oscilloscope has initialized USB flash drive (about
five seconds).
4. Press the “Data Depth” option button to select “Displayed” or
“Maximum”.
5. Press the “Para Save” option button to select “On” or “Off”.
6. Press the “Save” option button then you’ll go into the Save/Recall
interface
7. Create a file name then press the “Confirm” button (within 5
seconds, there will be a message “Save data success” displayed on
the screen). Now the CSV file has been saved to the USB flash
drive.