B&K Precision 2552-2559 - Manual - Manual (Page 74)

74
Operating Instructions:
Set up Sampling Format
You can press the “Acquisition” option button or turn the “Universal”
knob to select “Sampling” mode, “Peak Detect” mode or “Average” mode.
Set up Averages
When you select “Average” format, you can press the “Averages” option
button to select “4”, “16”, “32”, “64”, “128” or “256”.
Set up function interpolation
You can select Sinx interpolation or linear interpolation.
Figure 43 - Sine Interpolation
Figure 44 - Linear Interpolation