B&K Precision 2552-2559 - Manual - Manual (Page 92)

92
2. Press the first option button to enter the “second measurement
menu”.
3. Select measure type. If you press the “Voltage” option button,
“Voltage measurement” menu will display on the screen.
4. Press the “Source” option button to select “CH1”, “CH2”, “CH3”,
or “CH4” according to input signal channel. (CH3 and CH4
available for 4CH models only)
5. Press the “Type” option button to select the parameter type that
you want to measure. The corresponding icon and value will
display below the measure parameter.
6. Press the “Return” option button to return to the home page of the
“Auto Measurement” menu. The selected parameter and the
corresponding value will display on the top position of the home
page.
You can display the other parameters and its value on the
corresponding position in the same way. The screen can display
up to five parameters at one time.
If you want to measure time parameters using all measure
function, please follow these steps:
1. Press the “MEASURE” button to enter the “Auto Measure
menu”.
2. Press the top option button to enter the second page of “Auto
Measure menu”.
3. Press “All Mea” option button to enter the “All Measure menu”.
4. Press “Source” option button to select input signal channel.
5. Press the “Time” option button to select “On”. Now all of the
time parameters’ values will display on the screen at the same
time.