B&K Precision 2552-2559 - Manual - Manual (Page 26)

26
Note: The AUTO button can be disabled. Please see “Appendix C
Disabling Auto Function” for details.
Default Setup
The oscilloscope is set up for normal operation when it is shipped from the
factory. This is the default setup. To recall this setup, press the
DEFAULT SETUP button. For the default options, buttons, and controls,
when you press the DEFAULT SETUP button, refer to “Appendix A
Default Setup”.
The DEFAULT SETUP button does not reset the following settings:
• Language option
• Saved reference waveform files
• Saved setup files
• Display contrast
• Calibration data
VOLTS/DIV
adjustability
Coarse
Signal inverted Off
Horizontal position Center
TIME/DIV Adjusted
Trigger type Edge
Trigger source Auto detect the channel which has the input
signal
Trigger slope Rising
Trigger mode Auto
Trigger coupling DC
Trigger holdoff Minimum
Trigger level Set to 50%