Alpha Technologies AlphaNet IDH4 for XM3-HP Series - Technical Manual - Manual (Page 90)

90 746-257-B5-001, Rev. A1 (11/2013)
13.0 Dual IP Mode (Addendum), continued
13.3 Configuring Dual IP Mode, continued
13.3.3 Specifying idhdoc04.cfg name and location via DHCP Tags
In the User-defined area of the DHCP Tags, above option 192, the TRANSPONDER will look for
the following value:
Tag: [Insert Unique Tag Name, e.g. ‘ati-tag’]
Value: aticonfig
In the Tag value immediately following will be the value for the TFTP server to use:
Tag: [Insert Unique Tag Name, e.g. ‘ati-ip’]
Value: IP address of TFTP server (i.e. 192.168.1.51)
Immediately following will be the value for the config filename:
Tag: [Insert Unique Tag Name, e.g. ‘ati-name’]
Value: =idhdoc04.cfg (an equal sign needs to be in front of the filename for the DHCP server
to recognize this as a valid entry)