0 start up and verification, continued – Alpha Technologies AlphaNet IDH4 for XM3-HP Series - Technical Manual User Manual

Page 71

746-257-B5-001, Rev. A1 (11/2013)

Fig. 9-2, General Tab Screen

9.0 Start Up and Verification, continued

9.1

Initial Start Up and Local Verification, continued

Connect a computer’s network port to the transponder’s Ethernet port using a standard network cable.

Launch an Internet browser and enter 192.168.100.1 into the address. The transponder will return the

Web page shown below. Click on “General” to display the key communications parameters including

upstream and downstream power levels and the cable modem’s IP address, which confirms connectivity.