Alpha Technologies AlphaNet IDH4 for XM3-HP Series - Technical Manual - Manual (Page 77)

77 746-257-B5-001, Rev. A1 (11/2013)
10.1 Definitions and Settings, continued
Parameter OID Description Access Type Value
COMMUNITY STRINGS
atiMgmtSnmpCommunities 1.3.6.1.4.1.926.1.3.1.4.0 Object Identifier
atiMgmtSnmpCommGet 1.3.6.1.4.1.926.1.3.1.4.1.0 Default "Read" Community String Read/Write Octet String AlphaGet (default)
atiMgmtSnmpCommSet 1.3.6.1.4.1.926.1.3.1.4.2.0 Default "Read/Write" Community String Read/Write Octet String AlphaSet (default)
SNMP TRAP
atiMgmtSnmpControls 1.3.6.1.4.1.926.1.3.1.5 Object Identifier
atiMgmtSnmpTrapOnNormal 1.3.6.1.4.1.926.1.3.1.5.1.0 Traps sent when an item in an alarm
state returns to normal
Read/Write Integer 1 = Disable
2 = Enable (default)
atiMgmtSnmpSendCount 1.3.6.1.4.1.926.1.3.1.5.2.0 Number of times a trap is to be sent/
repeated
Read/Write Integer 1 to 9
1 (default)
atiMgmtSysSnmpTimeout 1.3.6.1.4.1.926.1.3.1.5.3.0 The number of minutes allowed to pass
without SNMP communications. On the
lapse of this many minutes the device
will reset. Setting this value to zero will
prevent timeout resets.
Read/Write Integer 0 to 65,000 (in minutes)
1440 (default)
SOFTWARE DOWNLOAD
atiMgmtSys 1.3.6.1.4.1.926.1.3.2.0 Object Identifier
atiMgmtSysDownload 1.3.6.1.4.1.926.1.3.2.1.0 Object Identifier
atiMgmtSysDownloadTftpAddress 1.3.6.1.4.1.926.1.3.2.1.1.0 DSM Firmware TFTP Server Address Read/Write IP Address 0.0.0.0 (default)
atiMgmtSysDownloadCtrl 1.3.6.1.4.1.926.1.3.2.1.2.0 DSM Firmware Download "Trigger" Read/Write Integer 1=readOneNext(1)
2=readTwoNext(2)
3=idle(3)
4=abort(4)
5=psReprogram(5)
atiMgmtSysDownloadStatus 1.3.6.1.4.1.926.1.3.2.1.3.0 DSM Firmware download Status Read Only Integer 1=Idle (default)
2=Ready
3=Request
4=Requested
5=Transferring
6=Testing
7=Data Done
8=Error
9=Closing
atiMgmtSysDownloadFile1 1.3.6.1.4.1.926.1.3.2.1.4.0 DSM Firmware Filename Read/Write Octet String DSM firmware filename
atiMgmtSysDownloadFile2 1.3.6.1.4.1.926.1.3.2.1.5.0 Reserved Read/Write Octet String
atiMgmtSysDownloadProgress 1.3.6.1.4.1.926.1.3.2.1.6.0 Download Progress in Bytes Read Only Integer 0:0..100000
atiMgmtSysDownloadSysDescr 1.3.6.1.4.1.926.1.3.2.1.7.0 DSM Firmware description used for
upgrades
Read/Write Octet String i.e. "ATI P01V01.12.0 " (legacy
DSMs)
atiMgmtSysDownloadSysObjectId 1.3.6.1.4.1.926.1.3.2.1.8.0 DSM Hardware Identifier used for
upgrades
Read/Write Object Identifier 1.3.6.1.4.1.926.1.99.1.1.1.0
atiMgmtSysDownloadConfigName 1.3.6.1.4.1.926.1.3.2.1.9.0 DSM Setup File Filename Read/Write Octet String idhdoc04.cfg
atiMgmtSysDownloadConfigAddress 1.3.6.1.4.1.926.1.3.2.1.10.0 DSM Setup File TFTP location Read/Write IP Address 0.0.0.0 (default)
atiMgmtSysDownloadCm 1.3.6.1.4.1.926.1.3.2.1.11.0 Force DSM Download from modem's
docsDevSwServerIp (Dual IP)
Read/Write Integer "1=Auto (default)
2=ForceCM"
WEB SERVER ENABLE
atiMgmtSysHttpPrams
1.3.6.1.4.1.926.1.3.2.2.4 Object Identifier
atiMgmtSysHttpEnabled 1.3.6.1.4.1.926.1.3.2.2.4.1.0 Access to IDH4 via Web Browser Read/Write Integer 1=Disable
2=Enable (default)
SIMPLE NETWORK TIME PROTOCOL
atiMgmtSysServers 1.3.6.1.4.1.926.1.3.2.3.0 Object Identifier
atiMgmtSysServSntp 1.3.6.1.4.1.926.1.3.2.3.1.0 IP Address of SNTP Server (Optional) Read/Write IP Address 0.0.0.0 (default)
10.0 Alpha MIB Parameters, continued